SBF Billet Aluminum Engine Blocks

  • « Back to Catalog
  • SBF Billet Aluminum Engine Blocks-image
  • SBF Billet Aluminum Engine Blocks


  • Energy Manufacturing billet blocks begin life as a 490 pound block of high grade forged 6061 aluminum. Featuring rolled thread tapped holes for extra strength and high strength cylinder liners, careful attention is given to fit and finish of the overall block. Each semi-finished block is thoroughly heat treated to T6 standards.

  • SBF BILLET ALUMINUM ENGINE BLOCKS BY ENERGY MANUFACTURING

    Standard Features:

    • Deck Height(s): 9.750”, 10.000”, or 10.200”
    • Cylinder Bore Spacing(s): Standard
    • Cylinder Bore Sizes: 4.100”-4.150”, customer specified
    • Cylinder Sleeve Protrusion: 0 to +.008”, customer specified
    • Cylinder Head Fastening per Deck: 9.750-10.200 Deck: (10) 1/2-13 studs & (4) 3/8-16 studs. Standard Pattern - Optional additional (4) 3/8-16 SC-1 inner bolt holes or (4) Energy splayed inner bolts
    • Cam Height(s): 9.750 - 10.200: Raised 1.273”
    • Cam Bore Sizes: 55mm Babbitt, 55mm Roller/60mm Babbitt, or 60mm Roller. Delivered finish honed
    • Lifter Bore Configuration(s): 9.750 - 10.200” Decks: Custom, Cam cores in stock
    • Lifter Bore Style(s) & Size(s): Lifter Bore Style(s) & Size(s): 9.750-10.200 Deck: .937 Keyway lifter bushings
    • Crank Bore(s): 351 Cleveland. Delivered finish honed
    • Main Cap Material(s): Billet Aluminum
    • Main Cap Fastening: Raised Cam Height Blocks: (2) 9/16” Doweled Vertical Studs, (2) 1/2” splayed studs
    • Stroke Clearance: 9.750" - 10.200” Deck: 4.750” Max
    • Finish ground camshafts, cores & spools available
    • Supported Timing Drive(s): 9.750-10.200” Deck Jesel Belt Drive, RCD Gear Drive, or Innovator’s West Belt Drive
  • Deck Cam Heights Main Size Part Number
    9.750" +1.273 351C 300-909
    10.000" +1.273 351C 300-906
    10.200" +1.273 351C 300-907
    Additional Information: Priority Main Oiling, Wet or dry external pump only, Custom Rear Cam Plug, Raised Cam Height Blocks: Chevy Bell Housing, Enclosed Cam Tunnel, & Custom Oil Pan Pattern. Custom lifter and head bolt patterns available upon request. *Certain options are only available in some configurations. Please call to verify the combination you require is available* For more information visit www.energymanufacturing.com
  • « Back to Catalog
  • SBF Billet Aluminum Engine Blocks-image
  • SBF Billet Aluminum Engine Blocks


  • Energy Manufacturing billet blocks begin life as a 490 pound block of high grade forged 6061 aluminum. Featuring rolled thread tapped holes for extra strength and high strength cylinder liners, careful attention is given to fit and finish of the overall block. Each semi-finished block is thoroughly heat treated to T6 standards.

  • SBF BILLET ALUMINUM ENGINE BLOCKS BY ENERGY MANUFACTURING

    Standard Features:

    • Deck Height(s): 9.750”, 10.000”, or 10.200”
    • Cylinder Bore Spacing(s): Standard
    • Cylinder Bore Sizes: 4.100”-4.150”, customer specified
    • Cylinder Sleeve Protrusion: 0 to +.008”, customer specified
    • Cylinder Head Fastening per Deck: 9.750-10.200 Deck: (10) 1/2-13 studs & (4) 3/8-16 studs. Standard Pattern - Optional additional (4) 3/8-16 SC-1 inner bolt holes or (4) Energy splayed inner bolts
    • Cam Height(s): 9.750 - 10.200: Raised 1.273”
    • Cam Bore Sizes: 55mm Babbitt, 55mm Roller/60mm Babbitt, or 60mm Roller. Delivered finish honed
    • Lifter Bore Configuration(s): 9.750 - 10.200” Decks: Custom, Cam cores in stock
    • Lifter Bore Style(s) & Size(s): Lifter Bore Style(s) & Size(s): 9.750-10.200 Deck: .937 Keyway lifter bushings
    • Crank Bore(s): 351 Cleveland. Delivered finish honed
    • Main Cap Material(s): Billet Aluminum
    • Main Cap Fastening: Raised Cam Height Blocks: (2) 9/16” Doweled Vertical Studs, (2) 1/2” splayed studs
    • Stroke Clearance: 9.750" - 10.200” Deck: 4.750” Max
    • Finish ground camshafts, cores & spools available
    • Supported Timing Drive(s): 9.750-10.200” Deck Jesel Belt Drive, RCD Gear Drive, or Innovator’s West Belt Drive
  • Deck Cam Heights Main Size Part Number
    9.750" +1.273 351C 300-909
    10.000" +1.273 351C 300-906
    10.200" +1.273 351C 300-907
    Additional Information: Priority Main Oiling, Wet or dry external pump only, Custom Rear Cam Plug, Raised Cam Height Blocks: Chevy Bell Housing, Enclosed Cam Tunnel, & Custom Oil Pan Pattern. Custom lifter and head bolt patterns available upon request. *Certain options are only available in some configurations. Please call to verify the combination you require is available* For more information visit www.energymanufacturing.com

Sales: 419.435.2711

© 2024 CALLIES PERFORMANCE PRODUCTS