Mopar Gen III Cast Aluminum Engine Block

Back to Catalog
  • « Back to Catalog
  • Mopar Gen III Cast Aluminum Engine Block-image

  • Mopar Gen III Cast Aluminum Engine Block

  • Mopar blocks can be purchased by calling Callies direct at 419-435-2711

  • Mopar Gen III Cast Aluminum Engine Block main image
  • Gen III Hellephant and Drag Pak Engine Blocks
  • Gen III Cast Aluminum Engine Block Standard Features


    Hellephant Block: P5160271AA
    9.25” Deck Height
    6.2/6.4 Timing Drive, VCT Solenoid
    Standard Lifter Pattern, .842 lifter bores
    Standard cam bore, bearings installed
    Delivered w/ 4.120” bores, require finish honing to 4.125”
    4140 q/t billet main caps
    4 bolt M1 & M5, 6 bolt M2-M4
    M12 Head Studs Available


    Drag Pak Block: P5160272AA
    9.25” Deck Height
    6.1 Timing Drive, No VCT Solenoid
    .937 Keyway lifter bushings, require finish hone
    60mmRB cam bore, bearings not included
    Delivered w/ 4.120” bores, require finish honing to 4.125”
    4140 q/t billet main caps
    4 bolt M1 & M5, 6 bolt M2-M4
    ½” Head Studs Available


    MOPAR and related logos, vehicle model names and trade dress are trademarks of FCA US LLC and used under license. ©2024 FCA US LLC
  • « Back to Catalog
  • Mopar Gen III Cast Aluminum Engine Block-image

  • Mopar Gen III Cast Aluminum Engine Block

  • Mopar blocks can be purchased by calling Callies direct at 419-435-2711

  • Mopar Gen III Cast Aluminum Engine Block main image
  • Gen III Hellephant and Drag Pak Engine Blocks
  • Gen III Cast Aluminum Engine Block Standard Features


    Hellephant Block: P5160271AA
    9.25” Deck Height
    6.2/6.4 Timing Drive, VCT Solenoid
    Standard Lifter Pattern, .842 lifter bores
    Standard cam bore, bearings installed
    Delivered w/ 4.120” bores, require finish honing to 4.125”
    4140 q/t billet main caps
    4 bolt M1 & M5, 6 bolt M2-M4
    M12 Head Studs Available


    Drag Pak Block: P5160272AA
    9.25” Deck Height
    6.1 Timing Drive, No VCT Solenoid
    .937 Keyway lifter bushings, require finish hone
    60mmRB cam bore, bearings not included
    Delivered w/ 4.120” bores, require finish honing to 4.125”
    4140 q/t billet main caps
    4 bolt M1 & M5, 6 bolt M2-M4
    ½” Head Studs Available


    MOPAR and related logos, vehicle model names and trade dress are trademarks of FCA US LLC and used under license. ©2024 FCA US LLC

Sales: 419.435.2711

© 2025 CALLIES PERFORMANCE PRODUCTS | CONSENT PREFERENCES