Mopar Gen II Cast Iron Hemi & Wedge Engine Blocks

  • « Back to Catalog
  • Mopar Gen II Cast Iron Hemi & Wedge Engine Blocks-image
  • Mopar Gen II Cast Iron Hemi & Wedge Engine Blocks

  • Without steady and reliable access to a Gen II Cast Iron Hemi / Wedge in over a decade car enthusiasts and sportsman racers have been left to scour scrapyards, market places, and garages to create a workable and affordable solution. Our licensing deal with Fiat Chrysler Automobiles will allow you to tap into this legendary platform on demand at an affordable price.

    All parts manufactured will carry authentic Mopar part numbers and be produced from original Mopar molds, cores, and engineering data.

    Instruction Sheet Links: 

    GEN II HEMI INSTRUCTION SHEET

    WEDGE INSTRUCTION SHEET

    • Deck Height(s): Standard Deck: 10.725", Deck Thickness: .600"
    • Camshaft: Cam Height: Standard 5.150"
    • Camshaft: Housing Bore: Delivered with Standard Stepped Cam Tunnel at finish size. Max Cam Housing Bore Size: 60mm Roller Bearing
    • Cylinder Bore: Max Cylinder Bore Diameter: 4.600”
    • Lifter: Lifter Diamerter: .905", Lifter Angle: 45 degrees
    • Main Cap Fastening: #1-4 Main Cap: (2) 1/2" Vertical Bolts, (2) 3/8" Side Bolts, #5 Main Cap: (2) 1/2" Vertical Bolts
    • Delivered with Finish Honed Crankshaft Housing Bore
    • Included with Block: Block Plug Kit, Camshaft Bearings (Loose), 0.040" Oil Gallery Restrictors (Installed), Rear Oil Seal with Fasteners.
    • All block part numbers can have cylinder bores finish honed upon request for an additional charge.
  • Description Part Number
    Hemi with 4.495” Semi Finish Bore P5160208AA
    Hemi with 4.245” Semi Finish Bore P5160210AA
    Hemi with 4.245” Semi Finish Bore P5160211AA
    • No lifter bores or pushrod clearance
    Wedge with 4.495” Semi Finish Bore P5160213AA
    Wedge with 4.313” Semi Finish Bore P5160212AA

    For questions, builders and racers should contact Callies by calling the sales office at (419) 435-2711.
  • « Back to Catalog
  • Mopar Gen II Cast Iron Hemi & Wedge Engine Blocks-image
  • Mopar Gen II Cast Iron Hemi & Wedge Engine Blocks

  • Without steady and reliable access to a Gen II Cast Iron Hemi / Wedge in over a decade car enthusiasts and sportsman racers have been left to scour scrapyards, market places, and garages to create a workable and affordable solution. Our licensing deal with Fiat Chrysler Automobiles will allow you to tap into this legendary platform on demand at an affordable price.

    All parts manufactured will carry authentic Mopar part numbers and be produced from original Mopar molds, cores, and engineering data.

    Instruction Sheet Links: 

    GEN II HEMI INSTRUCTION SHEET

    WEDGE INSTRUCTION SHEET

    • Deck Height(s): Standard Deck: 10.725", Deck Thickness: .600"
    • Camshaft: Cam Height: Standard 5.150"
    • Camshaft: Housing Bore: Delivered with Standard Stepped Cam Tunnel at finish size. Max Cam Housing Bore Size: 60mm Roller Bearing
    • Cylinder Bore: Max Cylinder Bore Diameter: 4.600”
    • Lifter: Lifter Diamerter: .905", Lifter Angle: 45 degrees
    • Main Cap Fastening: #1-4 Main Cap: (2) 1/2" Vertical Bolts, (2) 3/8" Side Bolts, #5 Main Cap: (2) 1/2" Vertical Bolts
    • Delivered with Finish Honed Crankshaft Housing Bore
    • Included with Block: Block Plug Kit, Camshaft Bearings (Loose), 0.040" Oil Gallery Restrictors (Installed), Rear Oil Seal with Fasteners.
    • All block part numbers can have cylinder bores finish honed upon request for an additional charge.
  • Description Part Number
    Hemi with 4.495” Semi Finish Bore P5160208AA
    Hemi with 4.245” Semi Finish Bore P5160210AA
    Hemi with 4.245” Semi Finish Bore P5160211AA
    • No lifter bores or pushrod clearance
    Wedge with 4.495” Semi Finish Bore P5160213AA
    Wedge with 4.313” Semi Finish Bore P5160212AA

    For questions, builders and racers should contact Callies by calling the sales office at (419) 435-2711.

Sales: 419.435.2711

© 2024 CALLIES PERFORMANCE PRODUCTS