Duramag

  • « Back to Catalog
  • Duramag-image
  • Duramag

  • The Callies Duramag billet crankshaft is designed to be the last crank you ever need for your LB7 thru LML Duramax engine. These cranks are fully machined from domestically-sourced 4330 steel in our Ohio plant. Intended for the most extreme applications, some features of these shafts include large fillet radii across all journals, a nitrided surface, narrowed rod journals (2.154”), and straight shot oil holes. Additionally, these billet cranks are intended for an internal balance, resulting in reduced harmonics under high loads.

  • Duramag

    Standard Features Average weight = 78 lbs.

    • Deep DuraCase nitride treatment that is durability and wear enhancing
    • Large True Form fillet
    • Keyed Shear Proof timing gear fit
    • Dual keyed shear-proof snout
    • Keyed shear-proof timing gear fit
    • Drilled rod journals for reduced inertia and ease of balance
    • Standard Duramax diameter but with strength enhancing 2.154 width
    • Machined from 4340 hardened steel
    • Main bearing oil holes are machined with lead-ins for enhanced cold start oil flow to rod journals
    • Will accept OEM post and flange bolts
  • Stroke Main Pin Cammed for Rod Length Part #
    3.898 3.146 2.477 6.418 D333MU@-MB
  • « Back to Catalog
  • Duramag-image
  • Duramag

  • The Callies Duramag billet crankshaft is designed to be the last crank you ever need for your LB7 thru LML Duramax engine. These cranks are fully machined from domestically-sourced 4330 steel in our Ohio plant. Intended for the most extreme applications, some features of these shafts include large fillet radii across all journals, a nitrided surface, narrowed rod journals (2.154”), and straight shot oil holes. Additionally, these billet cranks are intended for an internal balance, resulting in reduced harmonics under high loads.

  • Duramag

    Standard Features Average weight = 78 lbs.

    • Deep DuraCase nitride treatment that is durability and wear enhancing
    • Large True Form fillet
    • Keyed Shear Proof timing gear fit
    • Dual keyed shear-proof snout
    • Keyed shear-proof timing gear fit
    • Drilled rod journals for reduced inertia and ease of balance
    • Standard Duramax diameter but with strength enhancing 2.154 width
    • Machined from 4340 hardened steel
    • Main bearing oil holes are machined with lead-ins for enhanced cold start oil flow to rod journals
    • Will accept OEM post and flange bolts
  • Stroke Main Pin Cammed for Rod Length Part #
    3.898 3.146 2.477 6.418 D333MU@-MB

Sales: 419.435.2711

© 2024 CALLIES PERFORMANCE PRODUCTS